News
ept Products
Information Service
High Contact Density
The hm 2.0 series of hardmetric connectors was developed in accordance with the international IEC 61076-4-101 standard. These shielded connectors have a pitch of 2 mm and are suitable for applications that require high contact density and reliability. Standardization ensures that the connectors are compatible with products from different manufacturers.
Illustration similar
Specification | IEC 61076-4-101 |
---|---|
Performance Level | 2 |
No. of Contacts | 110 |
Termination Technology | Press-fit |
Termination Length | 3.7 mm |
Operating Temperature Range | -55°C to +125°C |
Insulator Material | PBT glass filled, UL 94 V-0 |
---|---|
Contact Material | Bronze |
Pitch | 2.0 mm |
---|---|
Mating Force per Pin | Contact: max. 0.75 N, Shielding: max. 1 N |
Separating Force per Pin | Contact: min. 0.15 N, Shielding: min. 0.15 N |
Durability | > 250 mating cycles |
Operational Current | 1.5 A @ +20°C, 1.0 A @ +70°C |
---|---|
Contact Resistance | max. 20 mΩ |
Clearance and Creepage | ≥ 0.8 mm |
Insulation Resistance | min. 104 MΩ |
Test Voltage | 750 V r.m.s |
Data Transfer Rate | 3.125 Gbit/s |
UL file | E130314 |
---|---|
Environment | RoHS compliant |
For details please download the drawings or contact ept directly.
Material | imm. Sn printed circuit boards |
---|---|
Nominal Hole | Ø 0.6 mm |
A PCB Thickness | min 2.2 mm |
B Plated Hole | Ø 0.60 ±0.05 mm |
C Drill Hole | 0.70 ±0.02 mm |
D Cu Plating | min. 25 µm |
E Surface | max. 1.5 µm; imm. Sn plating |
F Annular Ring | min. 0.1 mm |
Material | Ni, Au printed circuit boards |
---|---|
Nominal Hole | Ø 0.6 mm |
A PCB Thickness | min 2.2 mm |
B Plated Hole | Ø 0.60 ±0.05 mm |
C Drill Hole | 0.70 ±0.02 mm |
D Cu Plating | min. 25 µm |
E Surface | Ni, Au plating, 0.05 - 0.2 µm Au over 2.5 - 5 µm Ni |
F Annular Ring | min. 0.1 mm |
Material | pure Cu printed circuit boards |
---|---|
Nominal Hole | Ø 0.6 mm |
A PCB Thickness | min 2.2 mm |
B Plated Hole | Ø 0.60 ±0.05 mm |
C Drill Hole | 0.70 ±0.02 mm |
D Cu Plating | min. 25 µm |
E Surface | OSP*,z.B. GLICOAT-SMD (F2) with 0.12 - 0.15 µm |
F Annular Ring | min. 0.1 mm |
Material | HAL Sn printed circuit boards |
---|---|
Nominal Hole | Ø 0.6 mm |
A PCB Thickness | min 2.2 mm |
B Plated Hole | Ø 0.60 ±0.05 mm |
C Drill Hole | 0.70 ±0.02 mm |
D Cu Plating | min. 25 µm |
E Surface | HAL Sn, 5 - 15 µm |
F Annular Ring | min. 0.1 mm |
Plated through-hole according to IEC 60352-5
for PCB thickness 1.4 - 2.2 the part number is 245-31310-05
hm2.0 Female connector, type F
Part Number 246-31300-15
Available on request
Tube
20 pcs / Tube
16 Tube / Box
Find the right connector for your requirements
Touching allowed - order for free here!
Register now for the EPT Newsletter and get your whitepaper for free!
You may unsubscribe this newsletter at any time.