Compact and robust PCB connections in SMT

With One27 connectors from ept, board-to-board distances ranging from 8.00 to 20.00 mm can be achieved.
One27 Leiterplattenabstaende NEU 2023

Features

  • 12 to 80 contacts
  • , 1.4 A current-carrying capacity, 500
  • mating cycles,
  • maximum contact reliability
  • , tested compatibility with other suppliers
  • , IDC Female available
  • individually or with cable assembly, packaged in tape and reel
  • , LV214 tested

Applications

  • Board-to-board (mezzanine) from 8 mm to 20.00 mm
  • ; parallel and right-angle connections
  • ; IDC connection with ribbon cable
Filter
Straight Female

One27 Female mid-profile Part No. 414-53032-51

ept One27 Federleiste gerade Mid 404 53032 51
Can be combined for a PCB spacing (board-to-board distance) of 10.8–15.4 mm, contact wipe 1.5 mm, number of positions 32 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female mid-profile Part No. 414-53032-51 - Technical data

Basics

No. of Contacts32
Termination TechnologySMT
Board-to-Board Distance10.8 mm – 15.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female mid-profile Part No. 414-53012-51

ept One27 Federleiste gerade Mid 404 53012 51
Can be combined for a PCB spacing (board-to-board distance) of 10.8–15.4 mm, contact wipe 1.5 mm, number of positions 12 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female mid-profile Part No. 414-53012-51 - Technical data

Basics

No. of Contacts12
Termination TechnologySMT
Board-to-Board Distance10.8 mm – 15.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female mid-profile Part No. 414-53016-51

ept One27 Federleiste gerade Mid 404 53016 51
Can be combined for a PCB spacing (board-to-board distance) of 10.8–15.4 mm, contact wipe 1.5 mm, number of positions 16 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female mid-profile Part No. 414-53016-51 - Technical data

Basics

No. of Contacts16
Termination TechnologySMT
Board-to-Board Distance10.8 mm – 15.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female mid-profile Part No. 414-53020-51

ept One27 Federleiste gerade Mid 404 53020 51
Can be combined for a PCB spacing (board-to-board distance) of 10.8–15.4 mm, contact wipe 1.5 mm, number of positions 20 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female mid-profile Part No. 414-53020-51 - Technical data

Basics

No. of Contacts20
Termination TechnologySMT
Board-to-Board Distance10.8 mm – 15.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female mid-profile Part No. 414-53026-51

ept One27 Federleiste gerade Mid 404 53026 51
Can be combined for a PCB spacing (board-to-board distance) of 10.8–15.4 mm, contact wipe 1.5 mm, number of positions 26 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female mid-profile Part No. 414-53026-51 - Technical data

Basics

No. of Contacts26
Termination TechnologySMT
Board-to-Board Distance10.8 mm – 15.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female mid-profile Part No. 414-53040-51

ept One27 Federleiste gerade Mid 404 53040 51
Can be combined for a PCB spacing (board-to-board distance) of 10.8–15.4 mm, contact wipe 1.5 mm, number of positions: 40 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female mid-profile Part No. 414-53040-51 - Technical data

Basics

No. of Contacts40
Termination TechnologySMT
Board-to-Board Distance10.8 mm – 15.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female mid-profile Part No. 414-53050-51

ept One27 Federleiste gerade Mid 404 53050 51
Can be combined for a PCB spacing (board-to-board distance) of 10.8–15.4 mm, contact wipe 1.5 mm, number of positions 50 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female mid-profile Part No. 414-53050-51 - Technical data

Basics

No. of Contacts50
Termination TechnologySMT
Board-to-Board Distance10.8 mm – 15.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female mid-profile Part No. 414-53068-51

ept One27 Federleiste gerade Mid 404 53068 51
Can be combined for a PCB spacing (board-to-board distance) of 10.8–15.4 mm, contact wipe 1.5 mm, number of positions 68 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female mid-profile Part No. 414-53068-51 - Technical data

Basics

No. of Contacts68
Termination TechnologySMT
Board-to-Board Distance10.8 mm – 15.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female mid-profile Part No. 414-53080-51

ept One27 Federleiste gerade Mid 404 53080 51
Can be combined for a PCB spacing (board-to-board distance) of 10.8–15.4 mm, contact wipe 1.5 mm, number of positions 80 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 9.05 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female mid-profile Part No. 414-53080-51 - Technical data

Basics

No. of Contacts80
Termination TechnologySMT
Board-to-Board Distance10.8 mm – 15.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female low-profile Part No. 414-52012-51

ept One27 Federleiste gerade Low 404 52012 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–12.6 mm, contact wipe 1.5 mm, number of positions 12 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female low-profile Part No. 414-52012-51 - Technical data

Basics

No. of Contacts12
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 12.6 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female low-profile Part No. 414-52016-51

ept One27 Federleiste gerade Low 404 52016 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–12.6 mm, contact wipe 1.5 mm, number of positions 16 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female low-profile Part No. 414-52016-51 - Technical data

Basics

No. of Contacts16
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 12.6 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female low-profile Part No. 414-52020-51

ept One27 Federleiste gerade Low 404 52020 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–12.6 mm, contact wipe 1.5 mm, number of positions 20 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female low-profile Part No. 414-52020-51 - Technical data

Basics

No. of Contacts20
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 12.6 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female low-profile Part No. 414-52026-51

ept One27 Federleiste gerade Low 404 52026 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–12.6 mm, contact wipe 1.5 mm, number of positions 26 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female low-profile Part No. 414-52026-51 - Technical data

Basics

No. of Contacts26
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 12.6 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female low-profile Part No. 414-52032-51

ept One27 Federleiste gerade Low 404 52032 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–12.6 mm, contact wipe 1.5 mm, number of positions 32 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female low-profile Part No. 414-52032-51 - Technical data

Basics

No. of Contacts32
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 12.6 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female low-profile Part No. 414-52040-51

ept One27 Federleiste gerade Low 404 52040 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–12.6 mm, contact wipe 1.5 mm, number of positions: 40 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female low-profile Part No. 414-52040-51 - Technical data

Basics

No. of Contacts40
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 12.6 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female low-profile Part No. 414-52050-51

ept One27 Federleiste gerade Low 404 52050 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–12.6 mm, contact wipe 1.5 mm, number of positions 50 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female low-profile Part No. 414-52050-51 - Technical data

Basics

No. of Contacts50
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 12.6 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female low-profile Part No. 414-52068-51

ept One27 Federleiste gerade Low 404 52068 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–12.6 mm, contact wipe 1.5 mm, number of positions 68 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female low-profile Part No. 414-52068-51 - Technical data

Basics

No. of Contacts68
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 12.6 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female low-profile Part No. 414-52080-51

ept One27 Federleiste gerade Low 404 52080 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–12.6 mm, contact wipe 1.5 mm, number of positions 80 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 6.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female low-profile Part No. 414-52080-51 - Technical data

Basics

No. of Contacts80
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 12.6 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female high-profile Part No. 404-54012-51

ept One27 Federleiste gerade high 404 54012 51
Can be combined for a PCB spacing (board-to-board distance) of 15.4–20.0 mm, contact wipe 1.5 mm, number of positions 12 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female high-profile Part No. 404-54012-51 - Technical data

Basics

No. of Contacts12
Termination TechnologySMT
Board-to-Board Distance15.4–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female high-profile Part No. 404-54016-51

ept One27 Federleiste gerade high 404 54016 51
Can be combined for a PCB spacing (board-to-board distance) of 15.4–20.0 mm, contact wipe 1.5 mm, number of positions 16 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female high-profile Part No. 404-54016-51 - Technical data

Basics

No. of Contacts16
Termination TechnologySMT
Board-to-Board Distance15.4–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female high-profile Part No. 404-54020-51

ept One27 Federleiste gerade high 404 54020 51
Can be combined for a PCB spacing (board-to-board distance) of 15.4–20.0 mm, contact wipe 1.5 mm, number of positions 20 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female high-profile Part No. 404-54020-51 - Technical data

Basics

No. of Contacts20
Termination TechnologySMT
Board-to-Board Distance15.4–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female high-profile Part No. 404-54026-51

ept One27 Federleiste gerade high 404 54026 51
Can be combined for a PCB spacing (board-to-board distance) of 15.4–20.0 mm, contact wipe 1.5 mm, number of positions 26 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female high-profile Part No. 404-54026-51 - Technical data

Basics

No. of Contacts26
Termination TechnologySMT
Board-to-Board Distance15.4–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female high-profile Part No. 404-54032-51

ept One27 Federleiste gerade high 404 54032 51
Can be combined for a PCB spacing (board-to-board distance) of 15.4–20.0 mm, contact wipe 1.5 mm, number of positions 32 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female high-profile Part No. 404-54032-51 - Technical data

Basics

No. of Contacts32
Termination TechnologySMT
Board-to-Board Distance15.4–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female high-profile Part No. 404-54040-51

ept One27 Federleiste gerade high 404 54040 51
Can be combined for a PCB spacing (board-to-board distance) of 15.4–20.0 mm, contact wipe 1.5 mm, number of positions: 40 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female high-profile Part No. 404-54040-51 - Technical data

Basics

No. of Contacts40
Termination TechnologySMT
Board-to-Board Distance15.4–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female high-profile Part No. 404-54050-51

ept One27 Federleiste gerade high 404 54050 51
Can be combined for a PCB spacing (board-to-board distance) of 15.4–20.0 mm, contact wipe 1.5 mm, number of positions 50 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female high-profile Part No. 404-54050-51 - Technical data

Basics

No. of Contacts50
Termination TechnologySMT
Board-to-Board Distance15.4–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female high-profile Part No. 404-54068-51

ept One27 Federleiste gerade high 404 54068 51
Can be combined for a PCB spacing (board-to-board distance) of 15.4–20.0 mm, contact wipe 1.5 mm, number of positions 68 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female high-profile Part No. 404-54068-51 - Technical data

Basics

No. of Contacts68
Termination TechnologySMT
Board-to-Board Distance15.4–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female high-profile Part No. 404-54080-51

ept One27 Federleiste gerade high 404 54080 51
Can be combined for a PCB spacing (board-to-board distance) of 15.4–20.0 mm, contact wipe 1.5 mm, number of positions 80 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 13.65 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Female high-profile Part No. 404-54080-51 - Technical data

Basics

No. of Contacts80
Termination TechnologySMT
Board-to-Board Distance15.4–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
Straight Male

One27 Male mid-profile Part No. 413-53012-51

ept One27 Messerleiste gerade Mid 403 53012 51
Can be combined for a PCB spacing (board-to-board distance) of 9.5–18.4 mm, contact wipe 1.5 mm, number of positions 12 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male mid-profile Part No. 413-53012-51 - Technical data

Basics

No. of Contacts12
Termination TechnologySMT
Board-to-Board Distance9.5 mm – 18.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male mid-profile Part No. 413-53016-51

ept One27 Messerleiste gerade Mid 403 53016 51
Can be combined for a PCB spacing (board-to-board distance) of 9.5–18.4 mm, contact wipe 1.5 mm, number of positions 16 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male mid-profile Part No. 413-53016-51 - Technical data

Basics

No. of Contacts16
Termination TechnologySMT
Board-to-Board Distance9.5 mm – 18.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male mid-profile Part No. 413-53020-51

ept One27 Messerleiste gerade Mid 403 53020 51
Can be combined for a PCB spacing (board-to-board distance) of 9.5–18.4 mm, contact wipe 1.5 mm, number of positions 20 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male mid-profile Part No. 413-53020-51 - Technical data

Basics

No. of Contacts20
Termination TechnologySMT
Board-to-Board Distance9.5 mm – 18.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male mid-profile Part No. 413-53026-51

ept One27 Messerleiste gerade Mid 403 53026 51
Can be combined for a PCB spacing (board-to-board distance) of 9.5–18.4 mm, contact wipe 1.5 mm, number of positions 26 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male mid-profile Part No. 413-53026-51 - Technical data

Basics

No. of Contacts26
Termination TechnologySMT
Board-to-Board Distance9.5 mm – 18.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male mid-profile Part No. 413-53032-51

ept One27 Messerleiste gerade Mid 403 53032 51
Can be combined for a PCB spacing (board-to-board distance) of 9.5–18.4 mm, contact wipe 1.5 mm, number of positions 32 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male mid-profile Part No. 413-53032-51 - Technical data

Basics

No. of Contacts32
Termination TechnologySMT
Board-to-Board Distance9.5 mm – 18.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male mid-profile Part No. 413-53040-51

ept One27 Messerleiste gerade Mid 403 53040 51
Can be combined for a PCB spacing (board-to-board distance) of 9.5–18.4 mm, contact wipe 1.5 mm, number of positions: 40 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male mid-profile Part No. 413-53040-51 - Technical data

Basics

No. of Contacts40
Termination TechnologySMT
Board-to-Board Distance9.5 mm – 18.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male mid-profile Part No. 413-53050-51

ept One27 Messerleiste gerade Mid 403 53050 51
Can be combined for a PCB spacing (board-to-board distance) of 9.5–18.4 mm, contact wipe 1.5 mm, number of positions 50 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male mid-profile Part No. 413-53050-51 - Technical data

Basics

No. of Contacts50
Termination TechnologySMT
Board-to-Board Distance9.5 mm – 18.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male mid-profile Part No. 413-53068-51

ept One27 Messerleiste gerade Mid 403 53068 51
Can be combined for a PCB spacing (board-to-board distance) of 9.5–18.4 mm, contact wipe 1.5 mm, number of positions 68 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male mid-profile Part No. 413-53068-51 - Technical data

Basics

No. of Contacts68
Termination TechnologySMT
Board-to-Board Distance9.5 mm – 18.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male mid-profile Part No. 413-53080-51

ept One27 Messerleiste gerade Mid 403 53080 51
Can be combined for a PCB spacing (board-to-board distance) of 9.5–18.4 mm, contact wipe 1.5 mm, number of positions 80 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 3.25 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male mid-profile Part No. 413-53080-51 - Technical data

Basics

No. of Contacts80
Termination TechnologySMT
Board-to-Board Distance9.5 mm – 18.4 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male low-profile Part No. 413-52020-51

ept One27 Messerleiste gerade Low 403 52020 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–16.9 mm, contact wipe 1.5 mm, number of positions 20 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male low-profile Part No. 413-52020-51 - Technical data

Basics

No. of Contacts20
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 16.9 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male low-profile Part No. 413-52026-51

ept One27 Messerleiste gerade Low 403 52026 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–16.9 mm, contact wipe 1.5 mm, number of positions 26 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male low-profile Part No. 413-52026-51 - Technical data

Basics

No. of Contacts26
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 16.9 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male low-profile Part No. 413-52032-51

ept One27 Messerleiste gerade Low 403 52032 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–16.9 mm, contact wipe 1.5 mm, number of positions 32 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male low-profile Part No. 413-52032-51 - Technical data

Basics

No. of Contacts32
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 16.9 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male low-profile Part No. 413-52040-51

ept One27 Messerleiste gerade Low 403 52040 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–16.9 mm, contact wipe 1.5 mm, number of positions: 40 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male low-profile Part No. 413-52040-51 - Technical data

Basics

No. of Contacts40
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 16.9 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male low-profile Part No. 413-52050-51

ept One27 Messerleiste gerade Low 403 52050 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–16.9 mm, contact wipe 1.5 mm, number of positions 50 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male low-profile Part No. 413-52050-51 - Technical data

Basics

No. of Contacts50
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 16.9 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male low-profile Part No. 413-52068-51

ept One27 Messerleiste gerade Low 403 52068 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–16.9 mm, contact wipe 1.5 mm, number of positions 68 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male low-profile Part No. 413-52068-51 - Technical data

Basics

No. of Contacts68
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 16.9 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male low-profile Part No. 413-52080-51

ept One27 Messerleiste gerade Low 403 52080 51
Can be combined for a PCB spacing (board-to-board distance) of 8.0–16.9 mm, contact wipe 1.5 mm, number of positions 80 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 1.75 mm, Performance Level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Male low-profile Part No. 413-52080-51 - Technical data

Basics

No. of Contacts80
Termination TechnologySMT
Board-to-Board Distance8.0 mm – 16.9 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male high-profile Part No. 403-54012-51

ept One27 Messerleiste gerade High 403 54012 51
Can be combined for a PCB spacing (board-to-board distance) of 11.1–20.0 mm, contact wipe 1.5 mm, number of positions 12 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Male high-profile Part No. 403-54012-51 - Technical data

Basics

No. of Contacts12
Termination TechnologySMT
Board-to-Board Distance11.1–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male high-profile Part No. 403-54016-51

ept One27 Messerleiste gerade High 403 54016 51
Can be combined for a PCB spacing (board-to-board distance) of 11.1–20.0 mm, contact wipe 1.5 mm, number of positions 16 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Male high-profile Part No. 403-54016-51 - Technical data

Basics

No. of Contacts16
Termination TechnologySMT
Board-to-Board Distance11.1–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male high-profile Part No. 403-54020-51

ept One27 Messerleiste gerade High 403 54020 51
Can be combined for a PCB spacing (board-to-board distance) of 11.1–20.0 mm, contact wipe 1.5 mm, number of positions 20 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Male high-profile Part No. 403-54020-51 - Technical data

Basics

No. of Contacts20
Termination TechnologySMT
Board-to-Board Distance11.1–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male high-profile Part No. 403-54026-51

ept One27 Messerleiste gerade High 403 54026 51
Can be combined for a PCB spacing (board-to-board distance) of 11.1–20.0 mm, contact wipe 1.5 mm, number of positions 26 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Male high-profile Part No. 403-54026-51 - Technical data

Basics

No. of Contacts26
Termination TechnologySMT
Board-to-Board Distance11.1–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male high-profile Part No. 403-54032-51

ept One27 Messerleiste gerade High 403 54032 51
Can be combined for a PCB spacing (board-to-board distance) of 11.1–20.0 mm, contact wipe 1.5 mm, number of positions 32 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Male high-profile Part No. 403-54032-51 - Technical data

Basics

No. of Contacts32
Termination TechnologySMT
Board-to-Board Distance11.1–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male high-profile Part No. 403-54040-51

ept One27 Messerleiste gerade High 403 54040 51
Can be combined for a PCB spacing (board-to-board distance) of 11.1–20.0 mm, contact wipe 1.5 mm, number of positions: 40 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Male high-profile Part No. 403-54040-51 - Technical data

Basics

No. of Contacts40
Termination TechnologySMT
Board-to-Board Distance11.1–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male high-profile Part No. 403-54050-51

ept One27 Messerleiste gerade High 403 54050 51
Can be combined for a PCB spacing (board-to-board distance) of 11.1–20.0 mm, contact wipe 1.5 mm, number of positions 50 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Male high-profile Part No. 403-54050-51 - Technical data

Basics

No. of Contacts50
Termination TechnologySMT
Board-to-Board Distance11.1–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male high-profile Part No. 403-54068-51

ept One27 Messerleiste gerade High 403 54068 51
Can be combined for a PCB spacing (board-to-board distance) of 11.1–20.0 mm, contact wipe 1.5 mm, number of positions 68 in a pitch of 1.27 mm, termination technology SMT, height (unplugged): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Male high-profile Part No. 403-54068-51 - Technical data

Basics

No. of Contacts68
Termination TechnologySMT
Board-to-Board Distance11.1–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male high-profile Part No. 403-54080-51

ept One27 Messerleiste gerade High 403 54080 51
Can be combined for a PCB spacing (board-to-board distance) of 11.1–20.0 mm, contact wipe 1.5 mm, number of positions 80 in a 1.27 mm pitch, termination technology SMT, height (unplugged): 4.85 mm, Performance Level 1
Parallel
Perpendicular
SMT
High Density
Rugged
One27 Male high-profile Part No. 403-54080-51 - Technical data

Basics

No. of Contacts80
Termination TechnologySMT
Board-to-Board Distance11.1–20.0 mm
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
Messerleiste gerade

One27 Messerleiste low-profile Part No. 413-52012-51

ept One27 Messerleiste gerade Low 403 52012 51
kombinierbar zu Leiterplattenabstand 8.0 - 16.9 mm, Kontaktüberdeckung 1.5 mm, Polzahl 12 im Raster 1.27 mm, Anschlusstechnik SMT, Bauhöhe, ungesteckt: 1.75 mm, Performance level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Messerleiste low-profile Part No. 413-52012-51 - Technical data

Basics

No. of Contacts12
Termination TechnologySMT
Board-to-Board Distance8.0 mm - 16.9 mm
Operating Temperature Range-55°C bis + 125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact MaterialKupferlegierung
PlatingAu über NiP über Ni
Termination areaSn über Ni

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
Gütestufe 1: 500 Steckzyklen
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10 - 2000 Hz, 20g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A bei 20°C (4 von 50 polig)
1.4 A bei 20°C (50 von 50 polig)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepagemin. 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20 - 40 s bei 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS konform
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Messerleiste low-profile Part No. 413-52016-51

ept One27 Messerleiste gerade Low 403 52016 51
kombinierbar zu Leiterplattenabstand 8.0 - 16.9 mm, Kontaktüberdeckung 1.5 mm, Polzahl 16 im Raster 1.27 mm, Anschlusstechnik SMT, Bauhöhe, ungesteckt: 1.75 mm, Performance level 1
Parallel
Perpendicular
SMT
Cable-to-Board
High Density
Rugged
One27 Messerleiste low-profile Part No. 413-52016-51 - Technical data

Basics

No. of Contacts16
Termination TechnologySMT
Board-to-Board Distance8.0 mm - 16.9 mm
Operating Temperature Range-55°C bis + 125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact MaterialKupferlegierung
PlatingAu über NiP über Ni
Termination areaSn über Ni

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
Gütestufe 1: 500 Steckzyklen
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10 - 2000 Hz, 20g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A bei 20°C (4 von 50 polig)
1.4 A bei 20°C (50 von 50 polig)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepagemin. 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20 - 40 s bei 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS konform
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
Female angle

One27 Female angle Part No. 404-51012-51

ept One27 Federleiste gewinkelt 404 51012 51
90° angled, contact wipe 1.5 mm, number of positions: 12, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Female angle Part No. 404-51012-51 - Technical data

Basics

No. of Contacts12
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female angle Part No. 404-51016-51

ept One27 Federleiste gewinkelt 404 51016 51
90° angled, contact wipe 1.5 mm, number of positions: 16, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Female angle Part No. 404-51016-51 - Technical data

Basics

No. of Contacts16
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female angle Part No. 404-51020-51

ept One27 Federleiste gewinkelt 404 51020 51
90° angled, contact wipe 1.5 mm, number of positions: 20, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Female angle Part No. 404-51020-51 - Technical data

Basics

No. of Contacts20
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female angle Part No. 404-51026-51

ept One27 Federleiste gewinkelt 404 51026 51
90° angled, contact wipe 1.5 mm, number of positions: 26, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Female angle Part No. 404-51026-51 - Technical data

Basics

No. of Contacts26
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female angle Part No. 404-51032-51

ept One27 Federleiste gewinkelt 404 51032 51
90° angled, contact wipe 1.5 mm, number of positions: 32, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Female angle Part No. 404-51032-51 - Technical data

Basics

No. of Contacts32
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female angle Part No. 404-51040-51

ept One27 Federleiste gewinkelt 404 51040 51
90° angled, contact wipe 1.5 mm, number of positions: 40, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Female angle Part No. 404-51040-51 - Technical data

Basics

No. of Contacts40
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female angle Part No. 404-51050-51

ept One27 Federleiste gewinkelt 404 51050 51
90° angled, contact wipe 1.5 mm, number of positions: 50, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Female angle Part No. 404-51050-51 - Technical data

Basics

No. of Contacts50
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female angle Part No. 404-51068-51

ept One27 Federleiste gewinkelt 404 51068 51
90° angled, contact wipe 1.5 mm, number of positions: 68, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Female angle Part No. 404-51068-51 - Technical data

Basics

No. of Contacts68
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Female angle Part No. 404-51080-51

ept One27 Federleiste gewinkelt 404 51080 51
90° angled, contact wipe 1.5 mm, number of positions: 80, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Female angle Part No. 404-51080-51 - Technical data

Basics

No. of Contacts80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
Male angle

One27 Male angle Part No. 403-51016-51

ept One27 Messerleiste gewinkelt 403 51016 51
90° angled , contact wipe 1.5 mm, number of positions: 16, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Male angle Part No. 403-51016-51 - Technical data

Basics

No. of Contacts16
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male angle Part No. 403-51020-51

ept One27 Messerleiste gewinkelt 403 51020 51
90° angled , contact wipe 1.5 mm, number of positions: 20, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Male angle Part No. 403-51020-51 - Technical data

Basics

No. of Contacts20
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male angle Part No. 403-51026-51

ept One27 Messerleiste gewinkelt 403 51026 51
90° angled , contact wipe 1.5 mm, number of positions: 26, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Male angle Part No. 403-51026-51 - Technical data

Basics

No. of Contacts26
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male angle Part No. 403-51032-51

ept One27 Messerleiste gewinkelt 403 51032 51
90° angled , contact wipe 1.5 mm, number of positions: 32, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Male angle Part No. 403-51032-51 - Technical data

Basics

No. of Contacts32
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male angle Part No. 403-51040-51

ept One27 Messerleiste gewinkelt 403 51040 51
90° angled , contact wipe 1.5 mm, number of positions: 40, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Male angle Part No. 403-51040-51 - Technical data

Basics

No. of Contacts40
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male angle Part No. 403-51050-51

ept One27 Messerleiste gewinkelt 403 51050 51
90° angled , contact wipe 1.5 mm, number of positions: 50, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Male angle Part No. 403-51050-51 - Technical data

Basics

No. of Contacts50
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male angle Part No. 403-51068-51

ept One27 Messerleiste gewinkelt 403 51068 51
90° angled , contact wipe 1.5 mm, number of positions: 68, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Male angle Part No. 403-51068-51 - Technical data

Basics

No. of Contacts68
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male angle Part No. 403-51080-51

ept One27 Messerleiste gewinkelt 403 51080 51
90° angled , contact wipe 1.5 mm, number of positions: 80, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Male angle Part No. 403-51080-51 - Technical data

Basics

No. of Contacts80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 Male angle Part No. 403-51012-51

ept One27 Messerleiste gewinkelt 403 51012 51
90° angled , contact wipe 1.5 mm, number of positions: 12, termination technology SMT, pitch: 1.27 mm, Performance Level 1
Perpendicular
Horizontal
SMT
High Density
Rugged
One27 Male angle Part No. 403-51012-51 - Technical data

Basics

No. of Contacts12
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
PlatingAu over NiP over Ni
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Coplanarity≤ 0.1 mm
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current
IEC 60512-5-2
3.1 A at 20°C (4-pin out of 50-pin)
1.4 A at 20°C (50-pin out of 50-pin)
Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Processing

Soldering Temperature
JEDEC J-STD-020E
20–40 seconds at 260°C
MSL
JEDEC J-STD-020E
1
AssemblyPick and Place

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
IDC Female

One27 IDC Female Part No. 404-59012-61

One27 Federleiste IDC Neu Foto
For IDC connection with AWG 30/7 ribbon cable, contact wipe 1.5 mm, number of positions 12 in a pitch of 1.27 mm, pitch ribbon cable 0.635 mm, Performance Level 1, The IDC spring-loaded connector (Female) is intended for use in cable assembly. Please follow the processing instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Female Part No. 404-59012-61 - Technical data

Basics

No. of Contacts12
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C (depending on the type of cable used)

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ Spring -->
meter ≤ 10 mΩ IDC --> Cable
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 IDC Female Part No. 404-59016-61

One27 Federleiste IDC Neu Foto
For IDC connection with AWG 30/7 ribbon cable, contact wipe 1.5 mm, number of positions 16 in a pitch of 1.27 mm, pitch ribbon cable 0.635 mm, Performance Level 1, The IDC spring-loaded connector (Female) is intended for use in cable assembly. Please follow the processing instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Female Part No. 404-59016-61 - Technical data

Basics

No. of Contacts16
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C (depending on the type of cable used)

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ Spring -->
meter ≤ 10 mΩ IDC --> Cable
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 IDC Female Part No. 404-59020-61

One27 Federleiste IDC Neu Foto
For IDC connection with AWG 30/7 ribbon cable, contact wipe 1.5 mm, number of positions 20 in a pitch of 1.27 mm, pitch ribbon cable 0.635 mm, Performance Level 1, The IDC spring-loaded connector (Female) is intended for use in cable assembly. Please follow the processing instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Female Part No. 404-59020-61 - Technical data

Basics

No. of Contacts20
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C (depending on the type of cable used)

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ Spring -->
meter ≤ 10 mΩ IDC --> Cable
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 IDC Female Part No. 404-59026-61

One27 Federleiste IDC Neu Foto
For IDC connection with AWG 30/7 ribbon cable, contact wipe 1.5 mm, number of positions 26 in a pitch of 1.27 mm, pitch ribbon cable 0.635 mm, Performance Level 1, The IDC spring-loaded connector (Female) is intended for use in cable assembly. Please follow the processing instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Female Part No. 404-59026-61 - Technical data

Basics

No. of Contacts26
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C (depending on the type of cable used)

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ Spring -->
meter ≤ 10 mΩ IDC --> Cable
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 IDC Female Part No. 404-59032-61

One27 Federleiste IDC Neu Foto
For IDC connection with AWG 30/7 ribbon cable, contact wipe 1.5 mm, number of positions 32 in a 1.27 mm pitch, pitch ribbon cable 0.635 mm, Performance Level 1, The IDC spring-loaded connector (Female) is intended for use in cable assembly. Please follow the processing instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Female Part No. 404-59032-61 - Technical data

Basics

No. of Contacts32
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C (depending on the type of cable used)

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ Spring -->
meter ≤ 10 mΩ IDC --> Cable
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 IDC Female Part No. 404-59040-61

One27 Federleiste IDC Neu Foto
For IDC connection with AWG 30/7 ribbon cable, contact wipe 1.5 mm, number of positions: 40 in a 1.27 mm pitch, pitch ribbon cable 0.635 mm, Performance Level 1, The IDC spring-loaded connector (Female) is intended for use in cable assembly. Please follow the processing instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Female Part No. 404-59040-61 - Technical data

Basics

No. of Contacts40
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C (depending on the type of cable used)

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ Spring -->
meter ≤ 10 mΩ IDC --> Cable
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 IDC Female Part No. 404-59050-61

One27 Federleiste IDC Neu Foto
For IDC connection with AWG 30/7 ribbon cable, contact wipe 1.5 mm, number of positions 50 in a pitch of 1.27 mm, pitch ribbon cable 0.635 mm, Performance Level 1, The IDC spring-loaded connector (Female) is intended for use in cable assembly. Please follow the processing instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Female Part No. 404-59050-61 - Technical data

Basics

No. of Contacts50
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C (depending on the type of cable used)

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ Spring -->
meter ≤ 10 mΩ IDC --> Cable
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 IDC Female Part No. 404-59068-61

One27 Federleiste IDC Neu Foto
For IDC connection with AWG 30/7 ribbon cable, contact wipe 1.5 mm, number of positions 68 in a pitch of 1.27 mm, pitch ribbon cable 0.635 mm, Performance Level 1, The IDC spring-loaded connector (Female) is intended for use in cable assembly. Please follow the processing instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Female Part No. 404-59068-61 - Technical data

Basics

No. of Contacts68
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C (depending on the type of cable used)

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ Spring -->
meter ≤ 10 mΩ IDC --> Cable
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 IDC Female Part No. 404-59080-61

One27 Federleiste IDC Neu Foto
For IDC connection with AWG 30/7 ribbon cable, contact wipe 1.5 mm, number of positions 80 in a 1.27 mm pitch, pitch ribbon cable 0.635 mm, Performance Level 1, The IDC spring-loaded connector (Female) is intended for use in cable assembly. Please follow the processing instructions.
Cable-to-Board
High Density
Rugged
One27 IDC Female Part No. 404-59080-61 - Technical data

Basics

No. of Contacts80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C (depending on the type of cable used)

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Vibration, sinusoidal
IEC 60512-6-4
10–2000 Hz, 20 g
Contact mating problems if vibrations occur, sinusoidal
IEC 60512-2-5
≤ 1 µs
Shock, semi-sinusoidal
IEC 60512-6-3
50 g, 11 ms
Contact mating problems if shock occur, semi-sinusoidal
IEC 60512-2-5
≤ 1 µs
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Test Voltage
IEC 60512-4-1
500 VAC
Contact Resistance
IEC 60512-2-1
≤ 25 mΩ Spring -->
meter ≤ 10 mΩ IDC --> Cable
Clearance and Creepageat least 0.4 mm
Insulation Resistance
IEC 60512-3-1
≥ 10 GΩ

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
One27 PVC Standard cable assembly

One27 cable assembly, 12-pin, 100 mm, variant 120 Part No. 404-6112-100-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
12 pins, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a cable length of 100 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, 12-pin, 100 mm, variant 120 Part No. 404-6112-100-120-1 - Technical data

Basics

No. of Contacts12
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, 16-pin, 100 mm, variant 120 Part No. 404-6116-100-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
16 pins, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a cable length of 100 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, 16-pin, 100 mm, variant 120 Part No. 404-6116-100-120-1 - Technical data

Basics

No. of Contacts16
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, 20-pin, 100 mm, variant 120 Part No. 404-6120-100-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
20 pins, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a cable length of 100 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, 20-pin, 100 mm, variant 120 Part No. 404-6120-100-120-1 - Technical data

Basics

No. of Contacts20
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, 26-pin, 100 mm, variant 120 Part No. 404-6126-100-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
26 pins, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a cable length of 100 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, 26-pin, 100 mm, variant 120 Part No. 404-6126-100-120-1 - Technical data

Basics

No. of Contacts26
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, 32 pins, 100 mm, variant 120 Part No. 404-6132-100-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
32 pins, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a cable length of 100 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, 32 pins, 100 mm, variant 120 Part No. 404-6132-100-120-1 - Technical data

Basics

No. of Contacts32
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, 40-pin, 100 mm, Variant 120 Part No. 404-6140-100-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
40-pin, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a cable length of 100 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, 40-pin, 100 mm, Variant 120 Part No. 404-6140-100-120-1 - Technical data

Basics

No. of Contacts40
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, 50-pin, 100 mm, variant 120 Part No. 404-6150-100-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
50 pins, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a cable length of 100 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, 50-pin, 100 mm, variant 120 Part No. 404-6150-100-120-1 - Technical data

Basics

No. of Contacts50
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, 68-pin, 100 mm, variant 120 Part No. 404-6168-100-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
68 pins, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a cable length of 100 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, 68-pin, 100 mm, variant 120 Part No. 404-6168-100-120-1 - Technical data

Basics

No. of Contacts68
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, 80-pin, 100 mm, variant 120 Part No. 404-6180-100-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
80 pins, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a cable length of 100 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, 80-pin, 100 mm, variant 120 Part No. 404-6180-100-120-1 - Technical data

Basics

No. of Contacts80
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
One27 Custom PVC cable assembly

One27 cable assembly, Variant 100 Part No. 404-61NN-LLL-100-1

One27 Kabelkonfektion Konfektionsvariante 100 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 100 Part No. 404-61NN-LLL-100-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 120 Part No. 404-61NN-LLL-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 120 Part No. 404-61NN-LLL-120-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 130 Part No. 404-61NN-LLL-130-1

One27 Kabelkonfektion Konfektionsvariante 130 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 130 Part No. 404-61NN-LLL-130-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 400 Part No. 404-61NN-LLL-400-1

One27 Kabelkonfektion Konfektionsvariante 400 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 400 Part No. 404-61NN-LLL-400-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 420 Part No. 404-61NN-LLL-420-1

One27 Kabelkonfektion Konfektionsvariante 420 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 420 Part No. 404-61NN-LLL-420-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 110 Part No. 404-61NN-LLL-110-1

ept One27 Kabelkonfektion 110
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 110 Part No. 404-61NN-LLL-110-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 140 Part No. 404-61NN-LLL-140-1

ept One27 Kabelkonfektion 140
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 140 Part No. 404-61NN-LLL-140-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 440 Part No. 404-61NN-LLL-440-1

ept One27 Kabelkonfektion 440
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), PVC cable type: -30°C to +105°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 440 Part No. 404-61NN-LLL-440-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-30°C to +105°C

Material

Insulator MaterialLCP, UL 94 V-0
CTI value
IEC 60112
175
Contact Materialcopper alloy
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.2 A at 25°C
Operational Voltage30 V
Test Voltage>500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
One27 High-Temperature cable assembly

One27 cable assembly, Variant 120 Part No. 404-62NN-LLL-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 120 Part No. 404-62NN-LLL-120-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
TPE-ET S (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.3 A at 25°C
Operational Voltage48 V
Test Voltage>1,000 V
Contact ResistanceMax. 354 Ω/km at 20°C (cable)
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 100 Part No. 404-62NN-LLL-100-1

One27 Kabelkonfektion Konfektionsvariante 100 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 100 Part No. 404-62NN-LLL-100-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
TPE-ET S (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.3 A at 25°C
Operational Voltage48 V
Test Voltage>1,000 V
Contact ResistanceMax. 354 Ω/km at 20°C (cable)
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 130 Part No. 404-62NN-LLL-130-1

One27 Kabelkonfektion Konfektionsvariante 130 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 130 Part No. 404-62NN-LLL-130-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
TPE-ET S (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.3 A at 25°C
Operational Voltage48 V
Test Voltage>1,000 V
Contact ResistanceMax. 354 Ω/km at 20°C (cable)
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 400 Part No. 404-62NN-LLL-400-1

One27 Kabelkonfektion Konfektionsvariante 400 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 400 Part No. 404-62NN-LLL-400-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
TPE-ET S (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.3 A at 25°C
Operational Voltage48 V
Test Voltage>1,000 V
Contact ResistanceMax. 354 Ω/km at 20°C (cable)
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 420 Part No. 404-62NN-LLL-420-1

One27 Kabelkonfektion Konfektionsvariante 420 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 420 Part No. 404-62NN-LLL-420-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
TPE-ET S (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.3 A at 25°C
Operational Voltage48 V
Test Voltage>1,000 V
Contact ResistanceMax. 354 Ω/km at 20°C (cable)
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 110 Part No. 404-62NN-LLL-110-1

ept One27 Kabelkonfektion 110
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 110 Part No. 404-62NN-LLL-110-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
TPE-ET S (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.3 A at 25°C
Operational Voltage48 V
Test Voltage>1,000 V
Contact ResistanceMax. 354 Ω/km at 20°C (cable)
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 140 Part No. 404-62NN-LLL-140-1

ept One27 Kabelkonfektion 140
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 140 Part No. 404-62NN-LLL-140-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
TPE-ET S (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.3 A at 25°C
Operational Voltage48 V
Test Voltage>1,000 V
Contact ResistanceMax. 354 Ω/km at 20°C (cable)
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 440 Part No. 404-62NN-LLL-440-1

ept One27 Kabelkonfektion 440
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30/7 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), Cable type TPE-S: -55°C to +125°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 440 Part No. 404-62NN-LLL-440-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-55°C to +125°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
TPE-ET S (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational Current1.3 A at 25°C
Operational Voltage48 V
Test Voltage>1,000 V
Contact ResistanceMax. 354 Ω/km at 20°C (cable)
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
One27 halogen-free cable assembly

One27 cable assembly, Variant 400 Part No. 404-66NN-LLL-400-1

One27 Kabelkonfektion Konfektionsvariante 400 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 400 Part No. 404-66NN-LLL-400-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-40°C to +90°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
LSZH EVA/PO, UL 22088 (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational VoltageUSA: 150 V
; EU: <50 V
Test Voltage500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 100 Part No. 404-66NN-LLL-100-1

One27 Kabelkonfektion Konfektionsvariante 100 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 100 Part No. 404-66NN-LLL-100-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-40°C to +90°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
LSZH EVA/PO, UL 22088 (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational VoltageUSA: 150 V
; EU: <50 V
Test Voltage500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 120 Part No. 404-66NN-LLL-120-1

One27 Kabelkonfektion Konfektionsvariante 120 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 120 Part No. 404-66NN-LLL-120-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-40°C to +90°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
LSZH EVA/PO, UL 22088 (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational VoltageUSA: 150 V
; EU: <50 V
Test Voltage500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 130 Part No. 404-66NN-LLL-130-1

One27 Kabelkonfektion Konfektionsvariante 130 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 130 Part No. 404-66NN-LLL-130-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-40°C to +90°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
LSZH EVA/PO, UL 22088 (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational VoltageUSA: 150 V
; EU: <50 V
Test Voltage500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 420 Part No. 404-66NN-LLL-420-1

One27 Kabelkonfektion Konfektionsvariante 420 Foto
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 420 Part No. 404-66NN-LLL-420-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-40°C to +90°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
LSZH EVA/PO, UL 22088 (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational VoltageUSA: 150 V
; EU: <50 V
Test Voltage500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 110 Part No. 404-66NN-LLL-110-1

ept One27 Kabelkonfektion 110
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 110 Part No. 404-66NN-LLL-110-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-40°C to +90°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
LSZH EVA/PO, UL 22088 (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational VoltageUSA: 150 V
; EU: <50 V
Test Voltage500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 140 Part No. 404-66NN-LLL-140-1

ept One27 Kabelkonfektion 140
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 140 Part No. 404-66NN-LLL-140-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-40°C to +90°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
LSZH EVA/PO, UL 22088 (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational VoltageUSA: 150 V
; EU: <50 V
Test Voltage500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe

One27 cable assembly, Variant 440 Part No. 404-66NN-LLL-440-1

ept One27 Kabelkonfektion 440
Pole numbers 12 through 80, contact wipe 1.5 mm, AWG 30 pitch ribbon cable, 0.635 mm, with a freely selectable cable length from 30 to 999 mm, Assembly using the cut-to-insulation displacement connection (IDC) (IDC), LSZH cable type: -40°C to +90°C (at rest), colored wire on A1
Cable-to-Board
High Density
One27 cable assembly, Variant 440 Part No. 404-66NN-LLL-440-1 - Technical data

Basics

No. of Contacts12 - 80
Termination TechnologySMT
Operating Temperature Range-40°C to +90°C

Material

Insulator MaterialLCP, UL 94 V-0 (IDC Female)
LSZH EVA/PO, UL 22088 (cable)
CTI value
IEC 60112
175 (IDC Female)
Contact MaterialCopper alloy (IDC Female)
Tinned copper (cable)
Platinggold over palladium-nickel over nickel (IDC Female)
Termination areatin over nickel

Mechanical

Pitch1.27 mm (IDC Female)
0.635 mm (cable)
Mating Force per Pin≤ 0.5 N
Separating Force per Pin≥ 0.1 N
Durability
IEC 60512-9-1
performance level 1: 500 mating cycles
Overmating Distance0.9 mm
Wipe lenght1.5 mm
Center offset± 0.7 mm
Axial offset when mated (x/y)± 0.4 mm
Angular offset longitudinally± 4°
Angular offset transversally± 2°

Electrical

Operational VoltageUSA: 150 V
; EU: <50 V
Test Voltage500 V
Clearance and Creepageat least 0.4 mm

Approval / Compliance

UL fileE130314 & E493123
EnvironmentRoHS compliant
Stock Check
You will be redirected to an external page with the Supplyframe offer. By loading the content you accept the data processing by Supplyframe.
You can view Supplyframe's privacy policy here.

Yes, load content from Supplyframe
Other number of contacts? Other stacking heights? alternative plating? Individual assembly? Lagging contacts?
» Not the right one for you? Request a customized connector now!
Thank you very much! We will review your request and get back to you.

If you have any questions, please feel free to contact us by email or phone at any time.

No matching product found - Request this product now:

Fields marked with * are required.
You can view our privacy policy here.

Highlights of the One27 SMT connector

What can ept’s One27 connectors do? What PCB connection options and termination technologies do they offer? Why are One27 connector particularly robust and easy to work with?

This animated video provides clear answers to these and many other questions. Check it out right here! (or on YouTube)!

Features of the 1.27 mm SMT connector for board-to-board applications

The One27® series offers highly flexible yet reliable connector for a wide range of board-to-board applications. The product family is based on a pitch of 1.27 mm, offers various straight and angled types as well as connections with ribbon cable, and is available with a number of positions ranging from 12 to 80 contacts. The connector are pin-compatible with existing products of this type and deliver optimal results in testing.
image
One27 Male

Details at a Glance

image
anti-rotation feature

for proper connection of blade connectors and spring-Female

image
Lead-in chamfers

to compensate for center and angular misalignment during mating

image
Boardlock

secure connection to the circuit board

image
locating peg

Optimal processing thanks to precise placement

image
Coplanarity

Reliable soldering during processing

image
fillet formation

High stability and load-bearing capacity of the solder joint

image
One27 Female

Details at a Glance

image
Double-leg female contact

for secure and reliable connections

image
Smooth surface

Reliable contact through contact closure on a rolled, smooth surface

28915 100x100x72x72x100 image
effective mating length

High reliability through high-tolerance compensation

Motive Web Kurzbeschreibung Kontakt 1640x1195px
We manufacture custom-fit, tailored connector for your application.
  • Other numbers of positions
  • Other stack heights
  • Alternative contact plating
Request
a custom-connector quote
now

Flexible board-to-board spacing

With One27 connectors from ept, board-to-board distances ranging from 8.00 to 20.00 mm can be achieved.
The high over-insertion protection (effective mating length) of the One27-connector allows the male and female contacts (Messer- und Female) to be inserted variably within a range of 1.5 mm. By combining the various heights, both narrow and wider board-to-board distances can thus be achieved.
ept One27 Mittenversatz
radial misalignment in One27 Connectors
Permitted Misalignment Tolerances

The One27 SMT-connector tolerate a misalignment of 0.7 mm in both the longitudinal and transverse axes during mating.
ept One27 Winkelversatz
Angular angular misalignment in One27 Connectors
Permissible Angular Tilt Tolerances

When inserting the One27-PCB connector, the Female can be inserted into the Male at an angle of up to 4° along the longitudinal axis and 2° along the transverse axis.
image
Test reports are available regarding compatibility with other connectors on the market.
image
Tape-and-reel packaging for automated assembly
image
IDC Female, also available without a ribbon cable for custom cable lengths

One27 SMT PCB connector with a 1.27 mm pitch

Schreibtisch ept
“Offer the widest possible variety of connection types and connector variants within a single connector product family—all while maintaining a compact pitch and maximum robustness? We wanted to take on this challenge!

Our One27 SMT —PCB connector s with a pitch of 1.27 mm—now do exactly that and much more: they are ideally suited for a wide range of mezzanine, board-to-board, and board-to-cable applications in SMT, while being extremely robust and easy to process, and, moreover, verifiably compatible with SMT connectors with a 1.27 mm pitch already available on the market. With a selection of three different types—each available in male and Female —and a high effective mating length, virtually any board-to-board distance from 8 to 20.00 mm and any PCB layout can be implemented. In addition, we offer the One27 IDCFemale not only individually but also with a customizable cable assembly. There really is something for every need! We guarantee optimal processability of the SMT-PCB connector thanks to a coplanarity tolerance of just 0.1 mm and an incredible gathering range of ±0.7 mm or ±4° longitudinally and ±2° transversely. Try out the One27connector for yourself and order your free sample right away!"
Dominik Dotzer, Product Manager, ept GmbH

FAQ: Questions and Answers About One27 SMT-Leiterplattensteckverbindern

How can One27 SMT PCB connector be processed?In what ways can printed circuit boards be connected to each other using One27 SMT-Steckverbindern?What PCB spacing options are available with the One27 connectors?Why is the contact between the blade and spring-loaded connector (Female) particularly reliable in One27 connectors?Are One27 SMT-Leiterplatten-connector from ept compatible with other connectors on the market?For which applications are One27 PCB connector used?What types of currents can be transmitted using One27 connectors?What misalignment do One27 PCB connector tolerate during mating?Is the One27 IDC Female also available without a ribbon cable?Does ept also offer the One27 IDC-Female pre-assembled with cable assembly?Are the One27 SMT connector also available in tape-and-reel packaging?Are One27 PCB connector UL-recognized components?Are the ept PCB connector RoHS-compliant?
How can One27 SMT PCB connector be processed?

The One27 connector system is processed using Surface Mount Technology (SMT) and is therefore soldered directly onto printed circuit boards. The connector are typically shipped in tape and reel packaging, which enables fully automated pick-and-place processing. locating peg on the underside of the One27 connectors ensure precise positioning on the printed circuit board. ept also guarantees a maximum coplanarity of 0.1 mm for the contacts to ensure reliable soldering during processing.

In what ways can printed circuit boards be connected to each other using One27 SMT-Steckverbindern?

The various types within the One27-connector family allow for the connection of printed circuit boards in parallel, horizontal, or right-angle configurations, as well as the connection of ribbon cables to the printed circuit board.

What PCB spacing options are available with the One27 connectors?

With the One27 PCB connectors, a minimum PCB spacing of 8.00 mm and a maximum PCB spacing of 20.00 mm can be achieved. This is made possible, on the one hand, by the large overlap area of 1.5 mm. Blade and spring-loaded connectors (Female) can thus be pulled apart by up to 1.5 mm while still ensuring optimal and reliable contact. Additionally, the One27 low-, mid-, and high-profile variants can be combined in nine different configurations to create various board-to-board distances.

One27 Ueberstecksicherheit
Why is the contact between the blade and spring-loaded connector (Female) particularly reliable in One27 connectors?

In One27 connectors, contact is established via a double-pronged female contact (female contact) that encloses the contact pin (contact pin) of the blade strip (Male). This ensures reliable contact on at least one side of the contact pin, even if the connectors are misaligned. Furthermore, contact is made via the smooth, rolled surface of the female contact. This prevents wear on the contact surface and the formation of chips when inserting One27 connectors.

One27 Federkontakt
Are One27 SMT-Leiterplatten-connector from ept compatible with other connectors on the market?

The One27 connector system is fully compatible with connectors from other manufacturers. The compatibility of One27-connector is confirmed in test reports, which you can request at sales@ept.de.

For which applications are One27 PCB connector used?

One27 SMT connectors are suitable for all applications where PCBs need to be connected robustly while taking up minimal space. Thanks to the various available orientations, heights, and termination technologies of the One27 connector, you remain completely flexible in the arrangement of the PCBs to be connected as well as in the type of connection. Whether stacked in parallel at different distances, arranged horizontally side by side, at right angles, or via ribbon cable—how you connect the PCBs is entirely up to you.

What types of currents can be transmitted using One27 connectors?

A 50-pin One27 connector transmits up to 1.4 A at an ambient temperature of 20° C. For detailed specifications, please request our test reports at sales@ept.de.

What misalignment do One27 PCB connector tolerate during mating?

The One27 connector feature a high misalignment tolerance. For example, when mating blade and Female connectors, a radial misalignment of 0.7 mm is permitted in both the longitudinal and transverse axes. The angular misalignment tolerance is 4° longitudinally and 2° transversely.

Is the One27 IDC Female also available without a ribbon cable?

Yes, ept offers the IDC Female from the One27 product family without cables. This allows you to assemble the cables yourself and choose the cable length to suit your needs. Please refer to the assembly instructions.
However, ept also offers custom cable assembly of the One27 IDC Female, tailored to your specific requirements.

Does ept also offer the One27 IDC-Female pre-assembled with cable assembly?

Yes, ept offers the One27 IDC Female in insulation displacement connection (IDC) with cable assembly. You can freely choose the orientation of the connector, their number of positions, and the cable length. You also have the choice between three different cable types.

Are the One27 SMT connector also available in tape-and-reel packaging?

Yes, One27 SMT connector are typically shipped in tape and reel packaging, which enables fully automated processing via pick-and-place. You are also welcome to inquire about other packaging options with us. The One27 IDC Female is generally shipped in tray packaging.

Are One27 PCB connector UL-recognized components?

Yes, One27 connector from ept are UL-recognized components in the U.S. and Canada.

Are the ept PCB connector RoHS-compliant?

RoHS (Restriction of the Use of Certain Hazardous Substances) is the directive restricting the use of certain hazardous substances in electrical and electronic equipment.
We confirm that One27 connector from ept are compliant with RoHS Directive 2011/65/EU, as per the RoHS certificate. For more information, see RoHS & REACH.

Testimonials

We respect our clients’ desire for discretion and therefore do not cite any sources below.
However, we unconditionally guarantee the authenticity of these statements.

The short lead times for the One27-PCB connector were the deciding factor for us in sourcing the required connectors with a 1.27 mm pitch from ept.

Einkäufer Hardware-Entwicklung

For the One27 connectors, we can retain the existing PCB layout. This allows us to switch to ept’s SMT-connector very easily and without any design changes.

Entwicklungsingenieur Hardware-Entwicklung

Thanks to the offset of the connectors on ept’s angled One27 headers, we don’t need a second camera to ensure the quality of the solder joints.

Fertigungsleiter Contract Manufacturing

Thanks to ept, we can now also purchase the IDC Female in a 1.27 mm pitch as a loose component—that is, without cable assembly.

Leiter Einkauf Automatisierungstechnik

The soldering test for ept’s One27 SMT connectors convinced me of their excellent workability. I had never looked at connector this way during the selection process before!

Entwicklungsleiter Baugruppenfertigung

I had never before seen direct evidence of how well connectors can be soldered onto a printed circuit board. The soldering test for the One27 PCB connector opened my eyes: here, you can actually see how secure the solder connection between the contacts and the printed circuit board is.

Einkäufer Embedded Computing

It was very helpful for us to be able to purchase IDC female headers with a 1.27 mm pitch and such a wide range of contact counts individually.

Entwicklungsingenieur Hardware-Entwicklung

We would love to visit your beautiful location, but from a quality perspective, we see no reason to do so

Einkäufer Hardware-Entwicklung

Your message has been sent.

Thank you for your interest—we will process your request as soon as possible.

Contact Form

Fields marked with * are required.

Personal information

Your message

Privacy Policy

You can view our privacy policy here.

Your message has been sent.

Thank you for your interest—we will process your request as soon as possible.

Contact Form

Fields marked with * are required.

Personal information

Recall

Your message

I am interested in

Information materials

Privacy Policy

You can view our privacy policy here.

Thank you very much for your interest

You can download the white paper here:

Download the white paper

Before you can download the white paper, please fill out the following fields. Thank you.

Fields marked with * are required.

Personal information

Privacy Policy

You can view our privacy policy here.

Your message has been sent.

Thank you very much for your interest in our networking event following Electronica. We will review your request and confirm your participation as soon as possible.

Inquiry Form

Fields marked with * are required.

Personal information

Privacy Policy

You can view our privacy policy here.

Thank you very much!

We will contact you shortly to discuss your requirements. We will prepare and send you a detailed report on the high-speed characteristics as well as S-parameter for simulating your own design.

Request HighSpeed specifications and S-parameter to simulate your own design

Fields marked with * are required.
You can view our privacy policy here.

Thank you for your inquiry

We will review your request and get back to you as soon as possible.

Your requirements for the connector

Fields marked with an * are required; please fill them in.

Contact person

Your request

Wrong file format! Please select a PDF or JPG file.
You can view our privacy policy here.

Thank you for your inquiry

We will review your request and get back to you as soon as possible.

Request a quote for connector customization

Fields marked with an * are required; please fill them in.

Contact person

Your request

Wrong file format! Please select a PDF or JPG file.
You can view our privacy policy here.