Reliable signal transmission

Rugged PCB connector against mechanical, thermal, and chemical stresses

Our PCB connector are constantly optimized and continuously protected against new environmental influences.
Our PCB connector are constantly optimized and continuously protected against new environmental influences.

Requirements for Rugged PCB connector

PCB connector must be robust, reliably transmit signals, and must not fail. Robust PCB connector must withstand mechanical, thermal, and chemical stresses such as: • shock, • vibration, • oscillation, • gas, • humidity, • high temperatures, • moisture, and • dust, without failing. Robust connector for printed circuit boards are required particularly in the aerospace and aviation sectors, industrial automation, the automotive industry, and medical technology (medical technology). Our PCB connectors for printed circuit boards withstand these stresses

through various methods. Our development department continuously optimizes our connectors for printed circuit boards and ensures they are protected against additional environmental influences. We ensure consistently high quality through numerous testing procedures.

product finder: Our rugged connector

Reset Selection
product list ( connectors)

Free White Paper: How Board-to-Board connector Have Achieved Robustness

Read the free white paper to learn how connectors achieve robustness (connector).

Mechanical stresses such as vibration, oscillation, and shock – No contact failure with rugged PCB connectors

Suitable contact system for rugged PCB connector

Contact system: Double-sided spring-loaded connector (Female) on a PCB connector

Doppelseitiger Federkontakt
One27 double-sided spring contact (female contact) without (left) and with shock impact (right)
Our rugged PCB connectors feature a double-sided Female that provides redundancy and ensures reliable contact for wire-to-board connectors. Thanks to the second spring, signal transmission is guaranteed at all times—even when the PCB connector is subjected to high shock loads—via a single contact point. This ensures optimal device design.

By comparison: Traditional two-part PCB connector feature only a male contact and a female contact. In the event of a strong shock, this can cause the Male to lift off the Female, interrupting signal transmission.

Contact system: Hermaphroditic contact system in printed circuit board connector

Doppelseitiger Federkontakt 1789x1063px
Zero8 Hermaphroditic Contact System
PCB connector with the “hermaphroditic” contact system are significantly more robust. The unique feature of this contact system is that the Plug and Socket connector halves have identical contact geometries. As a result, each pin is contacted by two springs; the Plug and Socket are interlocked and cannot become detached from one another. This creates maximum redundancy and makes our board-to-board connector extremely robust and reliable in terms of contact. (Fig. 5). 

Contact system: One-piece connector for printed circuit boards

flexilink btb Leiterplattenverbinder 5mm Foto
One-piece flexilink connector
Only one-piece PCB connectors (PCB connector) are even more robust than the hermaphroditic contact system found in board-to-board connectors.

One-piece PCB connectors (connector) do not use the classic two-part contact principle consisting of a blade strip (Male) and a spring strip (Female). They have no vulnerable contact area and are therefore extremely resistant to shock, vibration, moisture, dust, and atmospheric conditions.

One-piece board-to-board connectors are also suitable for potting and other processes designed to protect the components of the PCB connector. When combined with the press-fit technology, robust, one-piece PCB connector provide the most secure mechanical and electrical connection between two PCB connectors.

Appropriate contact design for rugged PCB connector

ept f g w 150x
One27 spring tulip after the stamping and bending process
Our robust PCB connector make contact with the spring-loaded connector strip—the Female—which is bent at a 90-degree angle.

Advantage: The PCB PCB connector makes contact with the smooth, rolled surface rather than the uneven and sharp-edged underside of the stamped strip resulting from the punching process. This prevents excessive surface abrasion and reduces contact resistance (contact resistance).

In addition to the spring strip (Female), the blade strip (Male) in the PCB connector (PCB connector) must also be cleanly stamped and processed to ensure that defective geometries do not interrupt the contact during shock, vibration, and oscillation.

Suitable insulator for robust connector for Leiterplatten

ept Mitten Winkel Versatz
The Zero8 connector (connector) allows for a radial misalignment of ±0.7 mm and an angular misalignment of 4
The insulator of our robust connector for printed circuit boards are designed so that the sensitive contacts inside the connector are perfectly protected against shock, vibration, and oscillation. Lead-in chamfers on the insulator of the board-to-board connector compensate for misalignment of the printed circuit boards during mating and allow the connector halves to be mated without damage even in the event of radial or angular misalignment.

Tolerance range for rugged PCB connector

Toleranzausgleich im Betrieb
tolerance compensation of the Zero8 in all directions
The tolerance range is another factor influencing the robustness of a PCB connector. If the PCB connector cannot compensate for small tolerances, mechanical micro-movements such as shock, vibration, and oscillation will lead to wear or damage to the connector in the medium term. If a robust PCB connector has a float-Funktion, it can compensate for up to ±0.4 mm even during operation. This function is becoming increasingly important, especially when a PCB is populated with several different connectors.

Minimal corrosion and wear on the surface of rugged PCB connectors in harsh environments

Abrieb Oberflaeche
Abrasion and corrosion of the contact surface
Similar to Leiterplattenklemmen, connector with copper pins can oxidize easily when exposed to oxygen and ambient humidity. Our surface treatment prevents the oxidation of the connector pins by applying a protective layer. The robust board-to-board PCB connector from ept minimize surface abrasion. This results in less corrosion, less oxidation, and a long service life with many mating cycles.
How do we manage this despite micro-movements caused by shock, vibration, oscillation, gas, humidity, moisture, and dust? 
  1. High-quality and durable contact plating of our robust connector for printed circuit boards
  2. Smooth surface of Male and Female
The result is low contact resistance (contact resistance) and, consequently, excellent signal transmission from robust PCB connectors in rugged environments. This prevents poor electrical connections and signal degradation.

We use the following contact plating, among others:
  • Due to its resistance to corrosion and excellent conductivity, gold remains an extremely popular contact surface (contact surface) for rugged printed circuit board connectors (PCB connector), despite rising prices.
  • A nickel-phosphorus alloy with a gold flash coating offers a price-stable alternative surface. When combined in very specific proportions, these two materials exhibit the same positive properties as gold: high resistance to corrosion, low wear, and perfect conductivity. 

Gas, humidity, high temperatures, moisture, and dust—robust printed-PCB connector without contact failure

connector for printed circuit boards using press-fit technology

Bild Einpressen 4c
The press-fitting process
Using the press-fit technology, we produce a highly robust and contamination-resistant PCB connector that withstands vibration, shock, gas, humidity, moisture, and dust. Robust connector for printed circuit boards at press-fit technology have a failure rate (FIT rate) that is ten times better than that of automatically soldered connector for printed circuit boards. They are used, for example, in airbag systems, ABS, and ESP modules, since signal transmission in these applications must not fail under any circumstances.

How? press-fit technology generates maximum retention forces between connector and the printed circuit board with minimal press-in force. During the press-fit process, a press-fit pin with a diagonal larger than the hole diameter is pressed into a plated through hole (PTH) in the printed circuit board. In the press-fit zone, the connector pin is flexible so that the printed circuit board is not deformed by physical forces during the press-fit process. This creates a cold welding between contact pin and the metallized PCB hole: a gas-tight, corrosion-resistant, low-impedance, and electrically conductive mechanical connection that is also suitable for the potting. It is also specified in DIN EN 60352-5 and maintains a secure connection even under very high mechanical and thermal stresses, such as vibration, bending, moisture, dust, and temperature fluctuations, and can even withstand acceleration loads from shock up to 200 G. G-forces define forces acting on the human body, an object, or a vehicle due to changes in the magnitude and/or direction of velocity. By way of comparison: Upon re-entry into Earth’s atmosphere, a space capsule is subjected to a G-force of approximately 7 G. 

connector for printed circuit boards in SMT (Surface-Mount Technology)

ept geknickt loetpad LS 150
Meniscus formation around the One27’s SMT lead
Another option for a stable and reliable connection between connectors and printed circuit boards is Surface-Mount Technology (SMT). These are often used in industrial applications and in Industry 4.0, particularly when printed circuit boards need to be populated on both sides or when the minimum distance to components in the direction of force cannot be maintained. Our particularly robust connectors for printed circuit boards in SMT comply with IPC Class 3 for use in high-performance electronics. In this class, signal transmission must never fail and must handle higher currents. According to the IPC-A-610 standard, a robust connection between the connector and the printed circuit board must maintain the correct ratio of SMT lead, solder pad, and solder paste. 

How SMT works: Using solder paste, the connector are soldered to defined lands on the printed circuit board—the solder pads. In the reflow oven, the solder is melted and then allowed to solidify. An optimal solder connection (SMT) can be recognized by the uniform formation of the meniscus. The contact must be completely surrounded by solder fillet to achieve the best retention forces on the printed circuit board. 

Small, compact, yet robust miniature connector for printed circuit boards

Groessenvergleich
Extensive expertise gained through regular optimizations and developments enables us to build ever smaller and more robust PCB connector. As a result, our board-to-board connector are becoming increasingly durable and high-performance, even within an ever-shrinking installation space. The small, robust miniature PCB connector from ept guarantees fast, simple, and reliable signal transmission despite harsh environmental conditions such as shock, vibration, oscillation, high temperatures, and dust, and also ensures moisture protection for the PCB connector.

Using press-fit technology or Surface-Mount Technology (SMT), our small, compact Board-to-Board connector ensure a low failure rate and maximum retention forces. Small yet robust PCB connector are designed—despite their miniature size—so that, for example, lead-in chamfers on the insulator protect the contacts in the event of radial misalignment and angular misalignment. During installation, lead-in chamfers provide support to enable error-free mating of blade and Female connectors. This is achieved through the geometry of the contacts and the insulator. 

Mechanical and electrical testing of connectors for printed circuit boards

There are a variety of testing procedures for board-to-board connector, which may vary depending on the industrial environment. Our robust connector for printed circuit boards undergo the following tests in particular:

Stress testing for rugged connector

During the stress test for rugged connectors (connector), the dielectric withstanding voltage, and the contact resistance are tested over, for example, 500 mating cycles before and after the stress test.

Climatic test for rugged connector

During climatic testing for rugged connector, the test determines whether exposure to temperatures such as -55 °C for several hours, followed by 125 °C, has a negative effect on the contact resistance of the PCB connector. This ensures a temperature-resistant PCB connector.

Temperature shock test for rugged connector

The temperature shock test for rugged connectors verifies whether the board-to-board connector, for example, can withstand 100 cycles of rapid, extreme temperature cycling—each lasting 30 minutes—by subjecting the PCB connector to alternating heat and cold.

mating cycles Test and Corrosive Gas Test for robust connector

mating cycles testing and the corrosive gas test for robust connector verify whether radial misalignment and angular misalignment, as well as the tolerance range, function properly in the mated state under practical conditions. The combination of mating cycle testing and the mixed flowing gas test ensures that the performance of the PCB connector—in terms of contact resistance and dielectric withstanding voltage—has not deteriorated and that optimal protection against corrosive gases is guaranteed for the PCB connector. 
Motive Web Kurzbeschreibung Kontakt 1640x1195px

Rugged Connectors (connector): Application Examples

Your message has been sent.

Thank you for your interest—we will process your request as soon as possible.

Contact Form

Fields marked with * are required.

Personal information

Your message

Privacy Policy

You can view our privacy policy here.

Your message has been sent.

Thank you for your interest—we will process your request as soon as possible.

Contact Form

Fields marked with * are required.

Personal information

Recall

Your message

I am interested in

Information materials

Privacy Policy

You can view our privacy policy here.

Thank you very much for your interest

You can download the white paper here:

Download the white paper

Before you can download the white paper, please fill out the following fields. Thank you.

Fields marked with * are required.

Personal information

Privacy Policy

You can view our privacy policy here.

Your message has been sent.

Thank you very much for your interest in our networking event following Electronica. We will review your request and confirm your participation as soon as possible.

Inquiry Form

Fields marked with * are required.

Personal information

Privacy Policy

You can view our privacy policy here.

Thank you very much!

We will contact you shortly to discuss your requirements. We will prepare and send you a detailed report on the high-speed characteristics as well as S-parameter for simulating your own design.

Request HighSpeed specifications and S-parameter to simulate your own design

Fields marked with * are required.
You can view our privacy policy here.

Thank you for your inquiry

We will review your request and get back to you as soon as possible.

Your requirements for the connector

Fields marked with an * are required; please fill them in.

Contact person

Your request

Wrong file format! Please select a PDF or JPG file.
You can view our privacy policy here.

Thank you for your inquiry

We will review your request and get back to you as soon as possible.

Request a quote for connector customization

Fields marked with an * are required; please fill them in.

Contact person

Your request

Wrong file format! Please select a PDF or JPG file.
You can view our privacy policy here.